Friday, March 2, 2018

B & Tailor

It's been a while...


I've been sitting on this post for quite some time; while I was very happy to get my hands on this suit, the circumstances surrounding its acquisition made me a bit uneasy. I had been following the Korean tailors B & Tailor for some time; they post lovely photos on their instagram page, some of which I have nicked and posted below-



They certainly know how to dress a mannequin. There are several people who are selling product which is made by B&T; I know of one in Australia and one in Europe who operate independently of B&T, selling and fitting garments which are sent back to be made up in Korea, and there are probably others.

Someone with whom I have done business in the past offered me a suit and an odd trouser made by B & Tailor, as well as a coat from W.W. Chan and Sons. He had been fitted by one of these independent fitters and was unhappy with the results, to the point that the garments were never worn. I would pause here for a moment to address a common theme on internet clothing fora, that spending large sums of money on ready-to-wear garments is an abhorrent waste, when, for the same price one could have bespoke, which would naturally be far superior, and guaranteed to be perfect. Leaving aside the fact that some people have neither the time nor the inclination to go about with the selection of cloth and details, as well as the multiple fittings required, and would much rather try something on, decide that they like it, and purchase it, the end result of bespoke clothing is not always guaranteed to please. Having spent a large sum of money on a RTW suit, they are at least assured of what they are getting in the end. Stories like this one, where large sums of money were spent on bespoke clothing which ended up not only disappointing but unwearable should serve to quiet those who would advise that buying Brioni or Purple Label is an extravagance to be avoided in favor of having something made in a bespoke workshop.

The only reason I bring all this up is that a well-known clothing blogger had a garment made by B&T through a different fitter, and while his garment was at least wearable, he was disappointed in the results. On the other hand, the impeccably-dressed Andreas Weinas has had garments made by this same fitter and was very pleased so these may be two unfortunate blips.

I don't typically like to get in to this type of discussion but I wasn't sure if it would be proper to talk about the garment without discussing the reasons I had it. If the garment were horribly made I would have either ignored it entirely or perhaps torn it to shreds. But the garment is actually well-made, the trousers especially so, so I thought it worth examining.

The first word that comes to mind when looking at the workmanship is "neat". It is very clean. Made of Minnis' Fresco, this is a classic 3 roll to 2 with a relatively natural shoulder.

The breast pocket is done in a neapolitan-inspired "barchetta" style, though I don't care for the shape of it, one side being wider than the other.



The buttonholes are only ok, though perhaps because they, too, bear a resemblance to those from the south of Italy. Fresco is not an easy cloth to make buttonholes in so perhaps they do better work on more tightly woven cloth.



The interior of the coat is neatly done, and the lining had to be engineered to fit this shape of facing. Considering how sloppy many of the coats I have dissected on this blog have been, this is one of the best executions I have seen.



For those who fetishize high armholes, these are positively tiny.



Though the rest of the collar has been entirely constructed by hand, the gorge has been sewn by machine rather than drawn on with a stoting stitch.



As one would expect, the canvas and small shoulder wadding has been constructed by hand.



There are some more modern, almost industrial techniques used. Rather than the traditional, heavy edge tape, bias-cut lining has been attached to the edge of the canvas and caught in the facing seam- this keeps edges thinner and softer and is commonly used in full canvas suit factories.

The upper portion of the lapel has been stayed with fusible tape rather than sew-in tape.





I find it curious that they have used what appears to be a fusible tape in the bridle, though it is sewn down with hand stitches.



A piece of pocketing has been placed between the canvas and the cloth to enhance the roll of the lapel.



The chest canvas and haircloth have been trimmed back from the shoulder to create a softer, rounder appearance.



The shoulder and armhole seams have been stayed with lining. The armhole seam has been opened to about 4" below the shoulder seam and a piece of bias-cut canvas has been tacked to the seam.



The trouser is very neatly sewn, in particular the interesting waistband treatment. There is a hidden pocket on the inside of the waistband that has been very nicely executed.



B&Tailor definitely knows how to make a good garment, and knows how to fit a tailor's dummy; the expression of the garments they show on Instagram is very nice. I would be very interested to see more of their work, executed by their own in-house fitters. And while the two unfortunate stories might give one pause I don't think it's a reason not to try them out; I would perhaps suggest seeing them at one of their trunk shows.

StumbleUpon.com

3 comments:

clee1982 said...

definitely agree with the RTW vs. bespoke sentiment, I went bespoke once and can't say I'm impressed enough..., I'm sure awesome bespoke is still awesome just takes that much more commitment (and after so much RTW I actually know what I want).

Sonya N said...

Your site is my number one go-to place to learn more about the technical side of the sartorial world. Thank you so much for what you do and have given to this community. Your work here and your spirit of sharing should not be underestimated and your words will be referred to for years and years to follow. ~Sonya Glyn

Victor Mui said...

I live in Seoul and I have waiting ages for this review. Thanks a lot for all your insight throughout the years.

Post a Comment